How to replace the car air filter element

Automobile air filter element is mainly responsible for the removal of particulate impurities in the air device. In most cases, when the engine is working, it burns 1 kilogram of gasoline and takes in about 10 kilograms of air,

If the inhaled air contains dust and other impurities will aggravate the wear and tear of parts, so the car must be equipped with air filters. The air cleaner is composed of a filter core and a shell. The following Qinghe County Hongfeng Vehicle Parts Co., Ltd. tells you the car air filter replacement steps:

1. Stop and maintain the air filter, disassemble the lock at the bottom of the air filter in turn. When disassembling, hold the end of the spring clamp by hand, and remove the lower end cover of the air filter by force.

2. Take out the filter element and tap the end face or use dry compressed air to remove dust from the inside of the filter element.

3. Check whether the inner core is loose after maintenance, and install all parts in the opposite direction. Ensure that all parts are sealed during installation. If the sealing ring breaks out of the sealing groove, it should be re-loaded into the sealing groove. If the sealing ring is damaged, it should be replaced in time.

4. The maintenance of ordinary air filters of all specifications is basically the same. For air filters with safety filter elements, safety filter elements are only replaced without maintenance.