Volkswagen air filter element | replacement method of automobile air filter element

Automobile air filter element is a device mainly responsible for removing particulate impurities in the air. In most cases, when the engine is working and 1kg of gasoline is burned, about 10kg of air will be inhaled,

If the inhaled air contains dust and other impurities, it will aggravate the wear of parts, so the car must be equipped with an air filter. The air filter consists of a filter element and a housing. Next, Qinghe Hongfeng vehicle parts Co., Ltd. tells you the replacement steps of automobile air filter element:

1. Stop the machine for maintenance of the air filter, disassemble the latch at the bottom of the air filter in turn, hold the end of the spring clamp by hand during disassembly, and use upward force to remove the lower cover of the air filter.

2. Take out the filter element and gently tap the end face or use dry compressed air to remove the dust from the inside to the outside of the filter element.

3. After maintenance, check whether the inner core is loose, and install all components in the opposite direction. During installation, ensure that all parts are sealed. If any sealing ring comes out of the sealing groove, reinstall it into the sealing groove. If any sealing ring is damaged, replace it in time.

4. The maintenance of ordinary air filters of various specifications is basically the same. For air filters with safety filter elements, the safety filter elements are only replaced without maintenance.